SMG/S 860, 2V 860Ah. (120 hours at 1.85 V/el.) 2V FIAMM SMG Solar elements OPzV tubular plates, GEL. OBSOLETE !

SMG/S 860, 2V 860Ah. (120 hours at 1.85 V/el.) 2V Solar elements FIAMM SMG Solar OPzV tubular plates, GEL. 2V Solar elements with capacity 860Ah. in 120 hours at 1.85 V/el. Designed for regular, long and deep discharge regimes Ideal for: Renewable energy islands (Solar/Wind), island applications: BTS, mobile phone stations, signalling, lighting, high capacity applications in areas with unstable power grid and unreliable power supply.
Excellent cyclic performance especially with shallow discharges:
gt; 1,500 cycles at 20°C / 60% DoD (depth of discharge).
gt; 5,000 cycles at 20°C / 20% DoD
OPzV technology, with tubular positive plates and electrolyte immobilised in a gel-like structure (gel) Dimensions according to DIN 40742 elem. OPzV. Suitable for use at high temperatures Optimised to recover capacity in deep discharges: DIN 43539T5 Design life 18 years in buffer condition Minimal gas emission and maintenance-free; no topping up. Fully recyclable. NOTE: The prices shown do not include a set of mounting accessories such as: connections + connection covers, washers and fixing nuts, etc., which can be supplied on request.
Technical Features:
- Tubular positive plates, obtained by die-casting from a tin-rich and calcium-poor alloy
- Electrolyte immobilised in a gel structure
- Sheaths with high microporosity suitable for retaining the active material
- Flat kneaded negative plates, designed to have a lifetime comparable with that of the positive plates
- Separators with very high microporosity and low internal resistance
- Standard ABS plastics (flame-retardant ABS plastics available to IEC 707 FV0 and UL 94 V0 standards with LOI greater than 28%)
- Container and lid designed with thick walls for high mechanical resistance
- M10 female threaded terminals ensure high conductivity, maximum torsion resistance and easy installation
- Highly reliable polar passages, specially designed to prevent acid infiltration and corrosion of terminals
- Anti-fire device that prevents sparks or flame from entering the element
- Elements equipped with one-way safety valves that allow excess gas to escape in the event of overcharging
- Self-discharge < 2% per month at 20°C, allowing 6 months storage without recharging
- Can be installed in vertical or horizontal position
- Connections between elements made with fully insulated flexible cables, insulated screws, with probe hole for voltage check 

Note Good: Free transport with direct departure from FIAMM warehouse (Italy only). Ask for special quotation and delivery. The price quoted is purely indicative and may rise or fall depending on the quantity purchased and the value of the Euro/Dollar currency link at the time of order.